High flow injection grade HDPE
UNITHENE® LH5590 is an injection grade high density polyethylene resin (HDPE), specifically designed to provide excellent processability, good heat deflection temperature, and excellent stiffness. The product could be used as thin wall injection molding, powder coating, and master batch.
High flow injection grade HDPE
UNITHENE® LH5564 is a injection grade high density polyethylene resin (HDPE), specifically designed to provide excellent processability, good heat deflection temperature, and excellent stiffness. The product could be used as thin wall injection molding, powder coating, master batch, and Melt impregnation technique.
High flow injection grade HDPE
UNITHENE® LH5544 is a high density polyethylene resin (HDPE), specifically designed to provide excellent processability, excellent thermal bonding characteristic and excellent stiffness. The product could be used as thin wall injection molding, powder coating, master batch, melt impregnation technique, bi-component filaments and nonwoven fabric.
UNITHENE® HDPE resins are produced with low pressure gas phase process. The products are primarily used for extrusion application such as flat Yarn, coarse monofilament, film & sheets and injection molding such as pallets, crates, bottle caps and industrial containers.
Main applications:
Injection molding、Casting、Fine monofilament、Injection molding for crate、Extrusion coating、Flat yarn、Coarse monofilament、Film & Sheet extrusion.
Packing:
PE Bag |
Paper Bag |
Weight |
Length x Width x Height |
 |
 |
25 kgs
(net) |
65(±2) x 42(±1) x 13(±3) cm |
(Remark: Dimensions of packing are subjected to different types.)
SDS - Safety Data Sheet
Woven Bag - Flat yarn extrusion
Bottle Cap - Injection molding
HDPE Products:
# |
Products |
Main Applications |
Density
g/cm3 |
MI
g/10min |
File |
1 |
LH503 |
Injection moldingCompression molding |
0.956 |
4.10 |
 |
2 |
LH506 |
Injection molding |
0.955 |
5.50 |
 |
3 |
LH514 |
Injection moldingCasting |
0.956 |
12.00 |
 |
4 |
LH523 |
Injection molding |
0.956 |
23.00 |
 |
5 |
LH5544 |
Master batchPowder coatingMelt impregnationBi-component filaments and nonwoven fabricThin wall injection molding container |
0.955 |
44.00 |
 |
6 |
LH5564 |
Master batchMelt impregnation techniqueThin wall injection moldingPowder coating |
0.955 |
64.00 |
 |
7 |
LH5590 |
Master batchPowder coatingThin wall injection molding |
0.955 |
90.00 |
 |
8 |
LH606 |
Injection moldingFine monofilament |
0.962 |
6.00 |
 |
9 |
LH606-13 |
Injection molding for crate |
0.962 |
6.00 |
 |
10 |
LH614 |
Injection moldingCasting |
0.962 |
12.00 |
 |
11 |
LH901 |
Flat yarnCoarse monofilamentFilm & Sheet extrusion |
0.953 |
0.95 |
 |
The information contained herein is, to our best knowledge, true and accurate. However, since conditions of use are beyond our control, all recommendations or suggests are presented without guarantee or responsibility on our part. We disclaim all liability in connection with the use of information contained herein or otherwise. All risks of such use are assumed by the user. Furthermore, nothing contained herein shall be constructed as an inducement or recommendation to use any process or to manufacture or use any product in conflict with existing or future patents.