【Products】／【HDPE】   High Density Polyethylene Resins (HDPE) UNITHENE® HDPE resins are produced with low pressure gas phase process. The products are primarily used for extrusion application such as flat Yarn, coarse monofilament, film & sheets and injection molding such as pallets, crates, bottle caps and industrial containers. Woven Bag - Flat yarn extrusion Main applications： Injection molding、Casting、Fine monofilament、Injection molding for crate、Flat yarn、Coarse monofilament、Film & Sheet extrusion。 Bottle Cap - Injection molding Packing： PE Bag Paper Bag Weight：25 kgs net Length x Width x Height：65(±2) x 42(±1) x 13(±3) cm Dimensions of packing are subjected to different types.   Item Download MSDS - Material Safety Data Sheet   Products Main Applications Density （g/cm3） MI (g/10min) Download LH503 . Injection molding 0.956 4.10 LH506 . Injection molding 0.955 6.00 LH514 . Injection molding . Casting 0.956 12.00 LH523 . Injection molding 0.956 23.00 LH606 . Injection molding . Fine monofilament 0.962 6.00 LH606-13 . Injection molding for crate 0.962 6.00 LH608M . Injection molding 0.962 8.00 LH614 . Injection molding . Casting 0.962 12.00 LH901 . Flat yarn . Coarse monofilament . Film & Sheet extrusion 0.953 0.95   The information contained herein is, to our best knowledge, true and accurate. However, since conditions of use are beyond our control, all recommendations or suggests are presented without guarantee or responsibility on our part. We disclaim all liability in connection with the use of information contained herein or otherwise. All risks of such use are assumed by the user. Furthermore, nothing contained herein shall be constructed as an inducement or recommendation to use any process or to manufacture or use any product in conflict with existing or future patents.

Copyright 2008 USI Corporation. All Rights Reserved.